Marking & ID Systems
HOME   TERMS   RUSH SERVICE   CONTACT  
 
INDUSTRIAL MARKING
EQUIPMENT & SUPPLIES
MARKING EQUIPMENT
STEEL STAMPS & STEEL TYPE
DOT PEEN MARKING
INSPECTION STAMPS
HAMMERS & HOLDERS
NUMBERING HEADS
CENTER PUNCH
DOT MARKER INK JET
INDUSTRIAL MARKERS
INDUSTRIAL INKS
RUBBER STAMPS
STAMP PADS
STENCILS
I.D. TAGS
FACILITY I.D. SIGNS
CUSTOM ENGRAVING
CONTRACT PART MARKING
PACKAGE DATE CODING
EQUIPMENT & SUPPLIES
HOT STAMPING
EQUIPMENT & SUPPLIES

REQUEST A QUOTE

INDUSTRIAL INKS
Below are some of our industrial grade inks. We supply inks for virtually any application - inquire if you do not find what you are looking for. Most of these inks are available from 4 oz. bottles to 55 gallon drums.

Click here for Industrial Ink Stamp Pads

METAL & PLASTIC MARKING


#432 SOLVENT RESISTANT INK
Surfaces: Metal and plastic parts, printed circuit boards, polyethylene, polypropylene and other hard to mark surfaces.
Drying Time: 10-30 seconds
Characteristics: AERO #432 is designed to resist solvents such as degreasers, freon, alcohol, cleaning fluids, triclorethylene, soap and water. The longer the imprint is allowed to dry, the more resistant the impression becomes.
Adhesion is excellent.
Colors: Black, Blue, Green, Orange, Purple, Red, White and Yellow
Suggested Application: Natural rubber hand stamp with opaque pad

#652 INK FOR HARD-TO-MARK OILY SURFACES
Surfaces: Metal surfaces and parts, polyethylene surfaces, cloth, wood (raw and coated), rubber and foil
Drying Time: 15-20 seconds
Characteristics: Heavy, waterproof, fade resistant ink that is excellent for hard to mark surfaces, particularly oil coated drums or other metals and plastics which may be covered by a light oily residue.
Colors: Black, Blue, Brown, Green, Orange, Purple, Red, White and Yellow
Suggested Application: Natural rubber hand stamp with opaque pad

#6020 COOLANT RESISTANT INK
Surfaces: Stainless steel and other metals
Drying Time: 15 seconds
Characteristics: AERO #6020 displays excellent adhesion on clean metal and cast iron. Because of its coolant resistant qualities, it performs well on engine parts.
Colors: Black, Blue, Gray, Red and White
Suggested Application: Natural rubber hand stamp with opaque pad.

#141 INK - IDEAL FOR INSPECTORS
Surfaces: Metal, plastic, foil, packaging film, varnish coated paper, mylar, and most any other non-porous surface.
Drying Time: 2-4 minutes
Characteristics: AERO #141 is a waterproof ink with excellent adhesion. Because of the slow drying time, the ink remains moist on a pad for a longer period of time. It is especially good for inspectorsí pads and is suitable for self-inkers.
It meets the U.S. Department of Agriculture guidelines for use on food packaging.
Colors: Black, Blue, Brown, Green, Orange, Purple, Red, Silver, White and Yellow
Suggested Application: Natural rubber stamp with Mark II, opaque or stone pad.

#1250 INK - ALL PURPOSE FOR NON-POROUS SURFACES
Surfaces: Metal, plastic, foil, packaging film, varnish coated paper, mylar, photographs (front and back), and most any other non-porous surface.
Drying Time: 10-15 seconds
Characteristics: AERO #1250 is the ink specifically formulated for use on the Mark II Stamp Pad. It is an excellent all purpose ink, which is waterproof and maintains very good adhesion on resin coated photographic paper as well as both mylar and chrome coated labels. It meets the U.S. Department of Agriculture guidelines for use on food packaging and conforms to Government Spec. TT-1-1795A, Type I and Government Spec. AA-208, Type I. Use of the Mark II Stamp Pad is highly recommended.
Colors: Black, Blue, Brown, Green, Orange, Purple, Red, Silver, White and Yellow
Suggested Application: Natural rubber stamp with Mark II

#245 INK - ALL PURPOSE FOR NON-POROUS SURFACES
Surfaces: Metal, plastic, foil, packaging film, varnish coated paper, mylar, and most any other non-porous surface.
Drying Time: 3-5 seconds
Characteristics: A very fast drying ink with excellent adhesion, which is especially effective on all types of cellophane.
AERO #245 makes a sharp, rub resistant impression and is good for production line work because of its quick drying characteristics and ability to adhere to a variety of materials. It meets the U.S. Department guidelines for use on food packaging.
Colors: Black, Blue, Brown, Green, Purple and Red
Suggested Application: Natural rubber stamp with Mark II, opaque or stone pad.

HEAVY DUTY, SOLVENT RESISTANT HIGH TEMPERATURE INKS


TWO-PART EPOXY INK
Surfaces: Ceramics, phenolics, polyesters, melamine, silicones, ferrous and non-ferrous metals.
Drying Time: Dries to handle within 6-8 hours. Curing time can be shortened by adding heat. 4-7 days are required for maximum adhesion and chemical resistance. Requires addition of catalyst immediately prior to use.
Characteristics: A two component epoxy ink developed to be the most permanent ink available to mark on a wide range of difficult to mark substrates. TWO-PART EPOXY INK is the most resistant ink available to solvents, chemicals and hydrocarbons and will withstand temperatures in excess of 600 degrees Fahrenheit. It is the only ink which meets Government Spec. A-A-56032 (formerly MIL-43553)
Colors: Black and White (Available in 1/2 oz. packets and quarts only.)
Suggested Application: Offset and direct marking machines, silk screening or rubber stamp by spreading ink out into a small thin film with a brayer on an inkplate or glass

#6459 ONE-PART EPOXY INK
Surfaces: Metal, plastic, all non-porous surfaces
Drying Time: 10 seconds to touch. Becomes fairly permanent within 4 hours.
Characteristics: AERO #6459 is a one-part epoxy ink, but DOES NOT meet Government Spec. A-A-56032. It does resist most solvents and degreasers and is made with true epoxy resin.
Colors: Black, Blue, Brown, Gray, Green, Orange, Red, Violet, White and Yellow
Suggested Application: Roller coder, semi-flexo printer or natural rubber hand stamp with MARK II, Opaque or stone pad. Stone pads should be used only with dye colors.

PAPER MARKING


#5127 RUBBER STAMP INK
Surfaces: Paper, corrugated, Kraft paper, clay coated paper and labels.
Drying Time: Very fast - depending on the absorbency of the material being printed.
Characteristics: This heavier water soluble ink stays wet in a selk-inker or stamp pad and makes sharp, clear impressions which dry instantly through absorption. AERO #5127 will not affect polymer dyes and it meets the U.S.
Department of Agriculture guidelines for use on food packaging.
Colors: Over 24 colors available
Suggested Application: Self-inker, hand stamp with foam or cloth covered felt pad

WOOD OR CONCRETE


#1045 LUMBER MARKING INK
Surfaces: Lumber and other dry wood; also good for concrete
Drying Time: 2 minutes
Characteristics: This slow drying ink provides a good fade and water resistant imprint and meets Government Specs.
AA-208, Types I, II and IV and TT-1-1795A, Types I and II.
Colors: Black, Blue, Brown, Green, Orange, Pink, Purple, Red, White and Yellow
Suggested Application: Stencil roller or rubber stamp with Opaque or foam pad.

STENCIL MARKING


#6554 ROLL ON STENCIL INK
Surfaces: All porous and non-porous surfaces
Drying Time: 15 seconds
Characteristics: AERO #6554 is a good all-purpose stencil ink
Colors: Black, Blue, Green, Orange, Purple, Red, White and Yellow
Suggested Application: Foam pad and rubber stencil roller.

Click here for Industrial Ink Stamp Pads

Copyright © 2009 • Marking & ID Systems • Phone: (866) 295-9782 • FAX: (508) 753-1336